Automatic Retractable Bollards

RJP Electric Gates specialise in the complete installation of the entire URBACO range - the ideal solution for access control of a public or private street for vehicular traffic.

The Automatic Rising Bollard sinks into the ground in less than 3 seconds (adjustable) by means of a remote control device ), thus clearing the way for traffic and rises back once the vehicle has passed through.

Urbaco Automatic Bollards

Urbaco Automatic Rising Bollards

This system is very easy to use and its applications are varied. It enables not only access control to a private housing estate, company grounds or any street, but also gives an answer to urban needs in terms of remote on-line technical centralised supervision.

In case of power outage, the bollard goes down by gravity. As an option, negative security is available, locking the bollard upwards even in a power outage. This is especially useful for high security situations.

Limit switch captors detect the bollard status - up, down or in motion - to activate optional peripherals such as traffic lights, control logic etc. An optional internal antifreeze heater is also available enabling the bollards to be operated in areas of extreme cold.

visit urbaco.co.uk for more information.

Urbaco Automatic Bollards

Get Adobe Flash player

Urbaco Automatic Bollard diagram

Urbaco automatic rising bollards are available in 3 diameters:

120mm (4.72") •  200mm (7.87") •  250mm (9.84")

They are also available in two separate heights above ground:

500mm (19.68") • 750mm (29.52")

They are supplied as standard in Anthracite Grey unless otherwise specified, but are available in the following satin finish thermosetting polyester powder painted colours:

  ANTHRACITE
GREY
RAL 7016
(as standard)
BRONZE
KHAKI GREEN
(SPECIAL)
STEEL
GREY
(SPECIAL)
TRAFFIC
RED
RAL 3020
METALLIC
GREEN
RAL 6009
Gard 6 Parking Barrier download pdfDownload Info Brochure

Gard4

For road widths up to 3.6 Metres, Gard4 is engineered to manage vehicle access in public and commercial car parking situations.

Soft profiles and rounded corners counteract the sail effect in a barrier that integrates perfectly into a variety of installation contexts.

Frog-J Motor

Frog - J

download pdfDownload Info Brochure

The FROG - J system from CAME is designed to automate residential gates and in every case the pivot arm becomes the bottom hinge for the gate. Once correctly installed, there is no apparent sign of the mechanism other than the lid of the foundation casing box, and it does not detract from the overall aesthetics of an attractive gateway.

RJP Electric Gates are able to visit your gateway to professionally ensure that the FROG - J automation system is the best possible solution for your requirement.

The underground gate motors can be operated by all the standard CAME accessories e.g. remote controls, push buttons, keypads etc.

In the eventuality of a power cut the FROG - J system has a key operated manual release mechanism which is conveniently situated on both the inside and outside of the gateway.

FROG - J motors are EN compliant - which means that they are capable of meeting the limitation of motor forces required under UK and European law, straight out of the box, without additional limitations. This ensures unparalleled safety, security and both quicker and cheaper installation. At just 8cm in depth, the FROG - J requires less digging than its larger counterpart - which means less disruption without sacrificing performance.

Despite these advantages, we would still recommend that one of our trained engineers performs a full site survey and risk assessment - at absolutely no cost to you!

Super Frog Motor

Super~Frog

download pdfDownload Info Brochure

SuperFrog is an underground electromechanical operator, engineered and built by CAME to operate uncommonly large and heavy swing gates. Superfrog, for super-sized gates!

Made of the highest quality materials, the Superfrog is unmatched when it comes to power. The motor can also operate very large swing doors, such as those found on aircraft hangars, or even special doors installed in large industrial facilities or freight depots.

RJP Electric Gates are able to visit your business premises to professionally ensure that the SuperFrog automation system is necessary for your particular application.

SuperFrog motors can be operated by all the standard CAME accessories e.g. remote controls, push buttons, keypads etc.

Myto

Myto Motor

Myto is the electromechanical operator for lightweight swing gates up to 1.8 Metres in length or 200Kg in weight. Myto can be installed above or below ground level.

It is low voltage, and utilises encoder technology which guarantees conformity with current European standards relative to the maximum impact force generated by the gates' movements.

RJP Electric Gates are able to visit your gateway to professionally ensure that the Myto automation system is the best possible solution for your requirement.

Myto motors can be operated by all the standard CAME accessories e.g. remote controls, push buttons, keypads etc.